Within the quickly evolving world of transportable charger, the ISDT 608PD emerges as a noteworthy contender. This compact USB-C succesful LiPo charger, although small in dimension, packs a strong punch, able to charging 6S LiPo batteries as much as 200W. On this assessment, I’ll delve into the 608PD’s spectacular specs and design, whereas additionally highlighting some limitations to contemplate earlier than making your buy determination.
For these new to FPV, I like to recommend trying out my complete information on LiPo chargers for FPV drones: https://oscarliang.com/choose-lipo-battery-charger-power-supply/
The place to Purchase?
You could find the ISDT 608PD at these retailers:
Unboxing the ISDT 608PD, you’ll discover it in a simple package deal accompanied by an instruction guide, with no further equipment included.
- Most Enter Present: 10A on DC, 5A on USB-C
- Enter Voltage Vary: DC 5-30V, USB-C 5-28V
- Output Voltage Vary: DC 3.0~30V (perfect for as much as 6S LiPo/Li-ion)
- Charging Present: 0.5-10.0A
- Most Charging Energy: 240W on DC, 140W on USB-C
- Most Discharge Energy: USB-C 100W/5A
- Supported Battery Varieties and Sequence: LiFe, LiPo, LiHv (4.35V~4.50V) 1-6S, Pb 1-12S, NiMH 1-16S
- Stability Present: 0.8A/Cell Max
- Working Temperature: 0~40℃
- Storage Temperature: -20~60℃
- Dimensions: 72.5×60×26.6mm
- Weight: 85g
Upon first dealing with the ISDT 608PD, its sturdy construct high quality is instantly obvious. Designed for comfort, it suits comfortably in your hand, being solely barely bigger than different transportable chargers just like the ToolkitRC M4 Professional (on the left), and the SkyRC B6 Neo (on the suitable).
The system contains a sizeable colour display and three buttons for navigating by means of menus. The display boasts a high-contrast IPS show, guaranteeing clear visibility even in direct daylight, with adjustable brightness to go well with numerous lighting circumstances.
Moreover, the 608PD is supplied with an inner fan flanked by venting on both facet, which retains the unit cool throughout operation. The fan noise, even at full velocity, stays inside an appropriate vary.
The ISDT 608PD options XT60 and USB-C connectors for energy enter, accommodating a spread of energy sources.
On the output facet, there’s an XT60 and a 6S appropriate steadiness port, permitting you to cost LiPo batteries starting from 1S to 6S. Nevertheless, the absence of an XT30 connector is noticeable. For those who ceaselessly cost smaller batteries, you may have to put money into an adapter, which is a slight inconvenience.
Navigating the 608PD’s menu is kind of a breeze. The display is evident and readable, and the menu structure is intuitive and user-friendly. I respect iSDT’s determination to make use of bodily buttons for navigation, which simplifies the method. Though the menu operation and parameter changes differ from different sensible chargers, requiring a while to get used to, this isn’t a serious impediment. Later on this assessment, I’ll discuss extra about how one can function this charger in higher element.
The charger can retailer as much as 5 profiles for numerous charging settings. This function is especially helpful when you often cost differing types and sizes of batteries.
Moreover, whereas charging, it shows particular person cell voltages and inner resistance, identical to the full-size sensible chargers.
ISDT Hyperlink APP
A standout function of the 608PD is the ISDT Hyperlink App, accessible through smartphones. This app allows distant monitoring and management of the charger by means of Bluetooth. You’ll be able to view particular person cell voltages, cease and begin charging, and modify settings like battery chemistry, cell rely, and cost vary.
It offers a extra handy option to configure charger profiles in comparison with doing it instantly on the charger. Options like adjusting display brightness and beeping are unique to the app and never out there within the charger’s menu.
The app additionally permits for voltage calibration.
USB-C Output Function
An modern facet of the 608PD is its capability to rework a related LiPo battery right into a USB-C energy supply. This performance successfully turns the charger into a transportable energy financial institution – good for charging units like telephones, tablets and GoPros within the discipline.
How does it work?
Join a LiPo battery to the Output XT60 and steadiness port. Maintain down the middle button to activate USB Out mode. You may be prompted to set the bottom cell voltage to keep away from over-discharging – a commendable security function.
Then Plug within the system you want to cost within the USB-C Port. You’ll be able to monitor the cost present, and mah charged on display.
The 608PD doubles as a voltage checker. Merely plug within the steadiness lead, and it shows the cell voltages.
Downsides and Limitations
It’s necessary to notice that the iSDT 608PD lacks discharge and storage capabilities. Relying in your charging wants, this may very well be a big downside.
I examined the charger’s accuracy with a calibrated multimeter. The outcomes had been passable, displaying nice consistency between the charger’s readings and the digital multimeter.
When powered through DC by means of the XT60, the charger efficiently delivered over 200W of charging energy.
Utilizing a 65W USB-C adapter, the charger pulled round 60W. Whereas I couldn’t take a look at its 100W declare attributable to a scarcity of a extra highly effective adapter, for me personally it’s greater than sufficient as a journey charger.
The temperature-controlled cooling system is environment friendly, with the fan activating at round 60°C. Though barely loud at full velocity, it successfully reduces the temperature and quiets down because the charger cools, finally the fan turning off at 40°C.
Methods to Use?
Right here’s the supplied guide. Let me information you thru the method of utilizing the ISDT 608PD Charger.
Firstly, energy up the charger. You’ll be prompted to set a low voltage restrict, that is to keep away from over-discharging in case you are utilizing a battery as energy supply. You’ll be able to both choose a worth manually or wait just a few seconds for the dialog to vanish, which is able to then choose the default worth displayed on the display.
Subsequent, join the battery you want to cost to each the XT60 and steadiness port.
To pick out a charger profile, merely press the middle button. You’ll be able to then flick through totally different profiles utilizing the left and proper buttons.
If you wish to modify parameters throughout the present profile, maintain down the middle button, and use the left/proper buttons to decide on a brand new worth. Press the middle button once more to vary the following parameter. When you’re finished adjusting, maintain down the middle button to exit the profile adjustment mode.
Once you’re prepared to start out charging, press the middle button.
Throughout charging, you possibly can press the left/proper buttons to view the person cell voltages and inner resistance (IR).
To regulate the cost present whereas charging, maintain down the middle button.
To cease charging, shortly double-press the middle button.
Methods to Calibrate Voltage
To calibrate the steadiness port voltages, use the ISDT Hyperlink Smartphone APP. Begin by checking the person cell voltages of a 6S battery with a calibrated multimeter. Then, join the battery to the 608PD charger. Enter the voltages you famous earlier within the app beneath “Voltage Calibration.”
Priced at round $30, the ISDT 608PD Charger is a compelling purchase. Its user-friendly interface, compact design, and ISDT Hyperlink App make it a horny choice for a lot of customers. Nevertheless, the shortage of storage and discharge modes, in addition to the absense of an XT30 output connector, may very well be deal breaker for some.
You should purchase the ISDT 608PD charger from the next distributors:
So, do I like to recommend the iSDT 608PD? For those who by no means use storage/discharge features, then the 608PD is a wonderful alternative. Nevertheless, if these options are important, think about the SkyRC B6 Neo as a substitute. For many who primarily cost 4S or smaller LiPo batteries, the ToolkitRC M4 Pocket is one other nice choice, providing each XT30 and XT60 connectors.