Though the DJI Air 3 is a comparatively new drone, having been launched summer season of 2023, thus far it has acquired a number of firmware updates.
Firmware updates are important for drones as they oftentimes handle and repair bugs, implement efficiency enhancements, and add new options.
This text and the included YouTube video might be a step-by-step information exhibiting methods to replace the firmware on the DJI Air 3 and DJI RC 2 distant controller, which can at occasions additionally replace the firmware on the Air 3’s batteries.
Updating the Air 3’s Firmware
Whereas there are some that like to stick with the unique firmware their drones have been launched with, updating your Air 3’s firmware is helpful.
As talked about, new options, tweaks, and fixes are added over time. These updates enhance the consumer expertise. One such current enchancment to the Air 3 is the addition of Lively Observe-360 Auto and different options.
DJI has been dedicated, currently, to implementing lots of the options into the Air 3 that their prosumer traces have, extra particularly the Mavic 3 sequence.
To replace the firmware in your Air 3, you’ll want your:
Moreover, as a normal rule of thumb, it’s suggested to have the Air 3 batteries and distant controller absolutely charged earlier than operating firmware updates.
The steps to replace the firmware in your Air 3 are as follows:
STEP 1: Earlier than turning the Air 3 on, take away the gimbal cowl. It will be sure that when the Air 3 is turned on, the motion of the gimbal is not going to be impeded and trigger errors.
STEP 2: After booting up your DJI RC 2, ensure you are related to a WiFi community. To verify this, go into your settings display by double-sliding down the notification shade. In case your WiFi will not be enabled, faucet the WiFi icon and look forward to a connection.
In case you are connecting to WiFi for the primary time, press and maintain the WiFi icon. It will deliver you into the WiFi settings. Right here you possibly can hook up with your most popular community.
STEP 3: Activate the Air 3.
STEP 4: Should you use your DJI RC 2 to additionally fly a Mini 4 Professional along with the Air 3, relying on which drone was flown final, you could have to scroll by means of the checklist of drones used and select the Air 3.
Choose the Air 3. Then select Go Fly.
Should you solely have the Air 3, you’ll most definitely enter the DJI Fly Digital camera View display instantly.
STEP 5: From inside the Digital camera View display, press the again button, which can take you to the Air 3 house display.
Right here you will note that there’s a firmware replace accessible. Select Set up.
STEP 6: Should you haven’t already finished so, unfold the Air 3, so you possibly can insert the following set of batteries after the preliminary replace has been put in.
Throughout the replace course of, the lights on the Air 3 will flash numerous colours. The DJI RC 2 can even reboot itself.
After the firmware has been put in and up to date, you could have to replace every battery that you just personal and use within the Air 3.
STEP 7: Flip off the Air 3, take away the battery that was initially within the Air 3 for the replace, and insert the following one. Flip in your Air 3.
STEP 8: Hit the again button after the Air 3 activates and goes into Digital camera View. If there’s a battery firmware replace, it is best to now see one other replace accessible (for the battery). Choose Replace.
You’ll then be delivered to a further display that claims “replace accessible”. Choose Replace right here, after which the Air 3 battery will replace.
It’s regular, whereas the battery is within the means of being up to date, that the Air 3 will reboot itself, probably greater than as soon as.
After the battery has been up to date, you’ll obtain a message saying “Firmware replace profitable”. At this level, you possibly can exit the Replace display, returning again to the DJI Fly house display.
If the Air 3 has not shut off at this level, you’ll want to show off the Air 3, insert a brand new battery, and boot up once more for every battery that you just personal. It will provoke the replace for the battery after which you’ll be able to repeat the aforementioned steps.
Relying on the variety of batteries you have got, this course of can take a couple of minutes.
Manually Checking for Firmware Updates
In case you have not been prompted mechanically that there’s a new firmware accessible, you possibly can manually verify for updates, by doing the next:
With the DJI RC 2 turned on and related to your WiFi community, whereas on the DJI Fly house display, merely go to Profile > Settings > Firmware Replace > Verify for Firmware Updates.
After the DJI RC 2 checks for the replace, if there may be none, you’ll obtain a message saying “Your firmware is updated”.
If there’s a new firmware replace, you’ll be alerted and could have the choice to run the replace.